A Complete Range Of Metal Cleaning
And Surface Treatment Solutions

Telephone: +44 (0) 20 8281 6370
contact
 
 
   
 
  Click here to request
more information or an MSDS
CORREX HOME ArrowCORR-EX LCP-177: CORROSION PROTECTION SPRAY Arrow TECHNICAL INFORMATION

Technical information

LCP-177

CORR-EX LCP-177 is a proprietary non-flammable ultra thin film lubricant with anti-corrosion properties that when applied forms a “self healing” non-hardening or cracking coating that is approximately 7 microns (0.00028 inch) in thickness thick that is inert and will not increase or decrease contact resistance.

CORR-EX LCP-177 lubricant and corrosion preventative compound is formulated without sulphates, chlorides or halogens and is unexcelled in preventing corrosion deterioration on all surfaces of electronic and electrical equipment as well as all metals and alloys and mechanical close-tolerance low speed or light loaded moving components.

CORR-EX LCP-177 contains proprietary water displacing and anti-corrosive compounds that provide a superior lubrication coefficient and protect components against general and fretting corrosion, surface static electricity, corona, and other electro migration problems.

CORR-EX LCP-177 prevents the corrosive damage to electronics and other surfaces caused by exposure to the Sulfur Dioxide (SO2), Nitrogen Dioxide (NO2), Hydrogen Sulfide (H2S), Ammonia (NH3), Chlorine based gases (CL12) based gases in Class III mixed gas tests as well as the thermal decomposition by product of HFC-227ea used in fire suppression systems, Hydrogen Fluoride (HF). CORR-EX LCP-177  will not, however, remove corrosion from or repair an already corroded component or substrate.

LCP-177 is inert and will not increase or decrease electrical contact resistance and will not interfere with any electronics, but it will inhibit corrosion deterioration on all surfaces of electronic and electrical equipment including electrical contactor’s, connectors, and printed circuit boards as well as all metals and alloys. LCP-177 ’s superior lubrication and corrosion protection will protect components against moisture, wear, general and fretting corrosion, surface static electricity, corona, and other electro migration problems.

CORR-EX LCP-177 will not, however, remove corrosion from or repair an already corroded component or substrate.


CORR-EX LCP-177 has the following combination of properties:
• Displaces both fresh and salt water moisture
• Non-toxic and Non-flammable
• Has a decomposition temperature of 550°F
• Will not freeze or harden, retains properties even in high altitude applications
• Is extremely resistant to air-drying
• Self healing
• Does not attract contaminants
• Is inert and will not increase or decrease contact resistance
• Eliminates surface static electricity, Corona and other electro migration problems
• Protects against wear, moisture, general and fretting corrosion.
• Non-reactive to most plastics

NOTE
Shake aerosol cans prior to use. Stir bulk material prior to use and keep closed when not in use. CORR-EX LCP-177  is non-reactive to most plastics however do not use on Styrene or Polystyrene. Clear plastic surfaces (windows, ports, etc.) should be masked off before applying CORR-EX LCP-177  to prevent any possible fogging or cracking by the solvent carrier.

PACKAGING
CORR-EX LCP-177 is available in following containers:
16 oz, (12 oz net), aerosol cans (12 per case)
1 and 5 gallon cans
30 and 55 gallon drums

PHYSICAL PROPERTIES

Mixture Appearance

Translucent dark brown liquid

Mixture Odor

Faint ethereal odor

Mixture Specific Gravity @ 25̊° C.

1.29

Mixture Flash Point

None, (ASTM D-56)  (ASTM D-92) (ASTM D-93)

Aerosol Mixture Flash Point

None, Non-flammable aerosol, Flame Projection Test

Mixture Auto-Ignition Temperature

Not determined

Vapor Pressure

51.7 kPa at 25° C

Evaporation Rate  (n-Butyl Acetate = 1)

4.5

Relative Vapor Density

Not determined

Mixture Solubility in Water

Immiscible with water

Mixture Reactivity in Water

Not Readily Hydrolyzed

Mixture Ph Value

Neutral

Melting Point

-50° C / -58° F

Boiling Point

 43° C / 109° F

Oxidizing Properties

Not an oxidizing agent

Further information

For more information or advice please contact us by telephone on +44 (0)20 8281 6370 or email us using our contact form.
CORR-EX products are supplied and supported by EnviroTech Europe Ltd.


CORR-EX®
Industrial Corrosion Protection And Control Solutions

EnviroTech Europe Ltd
100a High Street
Hampton
Middlesex
United Kingdom TW12 2ST

NATO Cage Code: U0H05
Company registered in UK No 4170693
VAT No GB765 682 977
© Copyright 2017 ALL RIGHTS RESERVED

Follow EnviroTech:
TERMS AND CONDITIONSCOOKIE POLICYSITE MAP


Telephone: +44 (0) 20 8281 6370
Website: www.corrosion-protect.com