SuperCORR A Lubricates And Protects From One Can
The only DoD approved product qualified to MIL-DTL-87177B (revised MIL-L-87177A), Lubricants, Water Displacing, Synthetic: Type I, Grade B (Aerosols), National Stock Number 6850-01-528-0653 and Type II, Grade B (Bulk), National Stock Number 6850-01-326-7294.
Uses a very fast evaporating nontoxic and environmentally acceptable carrier fluid that is non-reactive to most plastics.
A non-flammable ultra thin film lubricant with anti-corrosion properties that when applied forms a “self healing” non-hardening or cracking coating that is approximately 7 microns (0.00028 inch) in thickness thick that is inert and will not increase or decrease contact resistance.
Contains a proprietary water displacing and anti-corrosive compounds that provide a superior lubrication coefficient and protect components against general and fretting corrosion, surface static electricity, corona, and other electro migration problems.
Military standards and industry approvals:
• MIL-DTL-87177B (revised MIL-L-87177A) Type I, Grade B "Avionics Cleaning and Corrosion Prevention/Control"
• Exceeds Mil C 81309 Corrosion Prevention Compounds
• Approved in US Tri-Service Corrosion Manuals
• ARMY: 1-1500-344-23
• NAVY NAVAIR 16-1-540
• AIRFORCE: T.O.1-1-689,691,700, 35-1-3
• BOEING Part No. 12-371
Manufactured in both aerosol cans (CO2 propellant) and in bulk.
It can be sprayed, sponged, brushed, poured or a component can be dipped into SuperCORR A.
The aerosol is used for regular maintenance of switches, relays and connectors on site to lubricate and protect contacts to reduce failures caused by poor connections.
SuperCORR A is available in following containers:
• 16 oz, (12 oz net), aerosol cans (12 per case)
• 1 and 5 gallon cans
• 30 and 55 gallon drums